HomeUncategorizedVapor Techniques – How to Modulate A vaporizer Like the GeekVape AEGIS Boost

Vapor Techniques – How to Modulate A vaporizer Like the GeekVape AEGIS Boost

geekvape aegis boost

The aegis boost is an awesome new vaporizer that does what it says on the tin – it vaporizes e-liquid! The Aegis Boost comes equipped with a variable wattage up to forty watts, an adjustable airflow control and a triple battery check-out, a built-in heat lamp and a 1500 mah capacity pod. It also comes with a three-layer adjustable airflow system, a triple airflow chamber and a triple glass window.

In order to use the Geekvape AEGIS Boost you need to ensure that your vaporizer is compatible with the AEGIS Boost head-set. If it isn’t, then you will not be able to use the vaporizer and it won’t work. This vaporizer works with the Asmodus II and the Vandy Vaporizer as well as other devices such as the Thermo Boost. There are three main components that make up the Geekvape AEGIS Boost, and these are the air flow controller, the battery and the coils. Let’s take a look at these parts and see how they perform and how the kit can benefit you.

The air flow controller is what actually activates the vaporizer. You simply use the bottom button to activate the airflow dial which allows the machine to spin at a high rate of speed. This is controlled by a push button on the bottom. You then increase the temperature of the liquid with the left button while turning the power of the unit up on the right. This means that the AEGIS Boost will vaporize the e-liquid at a much faster rate when compared to other vaporizers.

The second component of the AEGIS Boost is the adjustable airflow dial which allows you to change the coolant temperature. By increasing this temperature you get a higher performance and greater battery life. The battery life of the AEGIS Boost will last for about six to seven hours on a full charge, which is more than most vaporizers. By increasing the coil resistance you can greatly increase the performance, but in this case you can also shorten the battery life.

The final part is the pod connectors which link the coils together. The coils are soldered onto the outer cover, which is then screwed into each other. This is a simple set up that uses standard size Silicone Pod Cans. This allows you to get the maximum performance from the AEGIS Boost. All you have to do is add your flavors and blend your own e-liquid. The only other thing that you have to do is insert the wiring harness and put together your unit.

The Geekvape AEGIS Boost comes with a built in pod system that does not need to be wired to a vaporizer. By removing the outer cover and inserting the wire harness into the unit, you are able to use it with your existing vaporizer. You can also use the new wire system to connect two separate units together if you want to mix different flavors with each other. There is even a universal voltage converter that allows you to use batteries from any manufacturer that work with the AEGIS Boost.

Like most vaporizers the AEGIS Boost does not have a replaceable flavor cartridge. The best way to go is to purchase two separate pods with the same flavor. By mixing different flavors the vapor that is produced by the Geekvape AEGIS Boost will be different from the others. If you do decide to buy a replacement cartridge, be sure that you read the instructions to find out how to mix the flavors together.

The Geekvape AEGIS Boost has an easy to use controls that make it easy to regulate your airflow, temperature, and wattage. The built in voltage adjuster makes it easy to change the wattage at any time. It also has four adjustment buttons which make it extremely user friendly.

Leave a Reply